Inner Padded Pants + Outer Pants
All custom fit sizing information will be sent to your email immediately after purchase.
This pants kit includes both our padded custom fit inner pants and our outer pants.
These inner padded pants are built with the industry’s most fitted, comfortable, and breathable inner fabric:
- 140 GSM Lycra (Elastane Blend)
- MVTR (Moisture Vapor Transmission Rate): Above 15,000 g/m²/24
- Statistically rated as the #1 most breathable athletic fabric
- Tear Strength: Above 40 N
- Layered with Poron® foam for comfort on bare locations (e.g. knee)
The sole goal of the inner fabric is to hold the pads in place with maximum comfort and breathability, yet still be durable and tear-resistant.
Our all-encompassing protection is solely comprised of what is currently the industry’s highest impact-absorbing material:
- 15mm layer of polyurethane Elastopan® armor
- CE EN 1621 Level 2 certification
- Average transmitted force: 6.1 kN
- Peak transmitted force: 8.4 kN
- Absorption ratio: 8.1:1 (89% of the impact energy)
- 3 times more impact-absorbing than CE Level 1 pads
Not a single pad in the mountain bike industry outperforms our impact absorption strength. Furthermore, our pads are designed to protect the key vulnerable areas that almost all other pads miss (e.g. the knees’ sides and the loins).
Additionally, our armor is completely custom fit – another quality that zero other pads in the industry offer. This not only wholly stops pad shifting, but is far more comfortable (also, significantly comfortable pads are worn more).
Our kits are uniquely comfortably minimalistic, lacking commonly seen annoyances such as velcro straps, plastic materials, irritating layered fabrics, etc.
The pads inside this inner fabric are washable (without removal) and removable (for a lighter ride, if desired).
Now, for our outer pants:
Our heavyweight pants are built with a 450GSM Kevlar® LSJ Fleece material.
- This material is one of the most abrasion resistant and durable on the market.
- Statistically, this is the industry’s ultimate fabric for raw durability, with an ability to withstand 120,000 Martindale cycles.
- This is our signature and most loved material – there is practically no other material as comfortable, durable, and abrasion resistant as it on the market.
Our middleweight pants are built with a blend of 70% Cordura® Nylon, 20% PET, and 10% Elastane, overlaid in a square twill weave.
- This is statistically one of the most durable materials that is still above a high breathability rating of 8,000 g/m²/24 MVTR.
- This outer material is perfect for all-around biking that involves both intensity and desired breathability.
Our lightweight pants are composed of a 140GSM PET-Elastane® blend material.
- This outer suit is perfect for lighter, less intense, and hotter rides that still require a proper layer of durability.
- This material offers both an MVTR over 15,000 (extremely high breathability) and a Martindale cycle rating still above 40,000 (high durability).
The pants have a purposefully baggy design and a dual cinch belt. It is layered with breathable vented fabric in the groin area and the back of the knees. The ankles are tightened to prevent crank catching. The durable zipper pocket is shaped to store phones in place without discomfort.
All custom fit sizing information will be sent to your email immediately after purchase.
All custom fit sizing information will be sent to your email immediately after purchase.
This pants kit includes both our padded custom fit inner pants and our outer pants.
These inner padded pants are built with the industry’s most fitted, comfortable, and breathable inner fabric:
- 140 GSM Lycra (Elastane Blend)
- MVTR (Moisture Vapor Transmission Rate): Above 15,000 g/m²/24
- Statistically rated as the #1 most breathable athletic fabric
- Tear Strength: Above 40 N
- Layered with Poron® foam for comfort on bare locations (e.g. knee)
The sole goal of the inner fabric is to hold the pads in place with maximum comfort and breathability, yet still be durable and tear-resistant.
Our all-encompassing protection is solely comprised of what is currently the industry’s highest impact-absorbing material:
- 15mm layer of polyurethane Elastopan® armor
- CE EN 1621 Level 2 certification
- Average transmitted force: 6.1 kN
- Peak transmitted force: 8.4 kN
- Absorption ratio: 8.1:1 (89% of the impact energy)
- 3 times more impact-absorbing than CE Level 1 pads
Not a single pad in the mountain bike industry outperforms our impact absorption strength. Furthermore, our pads are designed to protect the key vulnerable areas that almost all other pads miss (e.g. the knees’ sides and the loins).
Additionally, our armor is completely custom fit – another quality that zero other pads in the industry offer. This not only wholly stops pad shifting, but is far more comfortable (also, significantly comfortable pads are worn more).
Our kits are uniquely comfortably minimalistic, lacking commonly seen annoyances such as velcro straps, plastic materials, irritating layered fabrics, etc.
The pads inside this inner fabric are washable (without removal) and removable (for a lighter ride, if desired).
Now, for our outer pants:
Our heavyweight pants are built with a 450GSM Kevlar® LSJ Fleece material.
- This material is one of the most abrasion resistant and durable on the market.
- Statistically, this is the industry’s ultimate fabric for raw durability, with an ability to withstand 120,000 Martindale cycles.
- This is our signature and most loved material – there is practically no other material as comfortable, durable, and abrasion resistant as it on the market.
Our middleweight pants are built with a blend of 70% Cordura® Nylon, 20% PET, and 10% Elastane, overlaid in a square twill weave.
- This is statistically one of the most durable materials that is still above a high breathability rating of 8,000 g/m²/24 MVTR.
- This outer material is perfect for all-around biking that involves both intensity and desired breathability.
Our lightweight pants are composed of a 140GSM PET-Elastane® blend material.
- This outer suit is perfect for lighter, less intense, and hotter rides that still require a proper layer of durability.
- This material offers both an MVTR over 15,000 (extremely high breathability) and a Martindale cycle rating still above 40,000 (high durability).
The pants have a purposefully baggy design and a dual cinch belt. It is layered with breathable vented fabric in the groin area and the back of the knees. The ankles are tightened to prevent crank catching. The durable zipper pocket is shaped to store phones in place without discomfort.
All custom fit sizing information will be sent to your email immediately after purchase.
All custom fit sizing information will be sent to your email immediately after purchase.
This pants kit includes both our padded custom fit inner pants and our outer pants.
These inner padded pants are built with the industry’s most fitted, comfortable, and breathable inner fabric:
- 140 GSM Lycra (Elastane Blend)
- MVTR (Moisture Vapor Transmission Rate): Above 15,000 g/m²/24
- Statistically rated as the #1 most breathable athletic fabric
- Tear Strength: Above 40 N
- Layered with Poron® foam for comfort on bare locations (e.g. knee)
The sole goal of the inner fabric is to hold the pads in place with maximum comfort and breathability, yet still be durable and tear-resistant.
Our all-encompassing protection is solely comprised of what is currently the industry’s highest impact-absorbing material:
- 15mm layer of polyurethane Elastopan® armor
- CE EN 1621 Level 2 certification
- Average transmitted force: 6.1 kN
- Peak transmitted force: 8.4 kN
- Absorption ratio: 8.1:1 (89% of the impact energy)
- 3 times more impact-absorbing than CE Level 1 pads
Not a single pad in the mountain bike industry outperforms our impact absorption strength. Furthermore, our pads are designed to protect the key vulnerable areas that almost all other pads miss (e.g. the knees’ sides and the loins).
Additionally, our armor is completely custom fit – another quality that zero other pads in the industry offer. This not only wholly stops pad shifting, but is far more comfortable (also, significantly comfortable pads are worn more).
Our kits are uniquely comfortably minimalistic, lacking commonly seen annoyances such as velcro straps, plastic materials, irritating layered fabrics, etc.
The pads inside this inner fabric are washable (without removal) and removable (for a lighter ride, if desired).
Now, for our outer pants:
Our heavyweight pants are built with a 450GSM Kevlar® LSJ Fleece material.
- This material is one of the most abrasion resistant and durable on the market.
- Statistically, this is the industry’s ultimate fabric for raw durability, with an ability to withstand 120,000 Martindale cycles.
- This is our signature and most loved material – there is practically no other material as comfortable, durable, and abrasion resistant as it on the market.
Our middleweight pants are built with a blend of 70% Cordura® Nylon, 20% PET, and 10% Elastane, overlaid in a square twill weave.
- This is statistically one of the most durable materials that is still above a high breathability rating of 8,000 g/m²/24 MVTR.
- This outer material is perfect for all-around biking that involves both intensity and desired breathability.
Our lightweight pants are composed of a 140GSM PET-Elastane® blend material.
- This outer suit is perfect for lighter, less intense, and hotter rides that still require a proper layer of durability.
- This material offers both an MVTR over 15,000 (extremely high breathability) and a Martindale cycle rating still above 40,000 (high durability).
The pants have a purposefully baggy design and a dual cinch belt. It is layered with breathable vented fabric in the groin area and the back of the knees. The ankles are tightened to prevent crank catching. The durable zipper pocket is shaped to store phones in place without discomfort.
All custom fit sizing information will be sent to your email immediately after purchase.